User manual

Administration Methods
mySND User Manual 24
Example 1
This email causes the SND Server to send the parameter list to the
sender of the email.
Fig. 3: Administration via Email - Example 1
Example 2
This email configures the parameter 'Description' on the SND Server.
Fig. 4: Administration via Email - Example 2
2.4 Administration via the Reset Button of the
Device
LEDs, the reset button and various ports can be found on the SND
Server. These components are described in the 'Quick Installation
Guide'.
Using the reset button you can reset the SND Server’s parameter
values to their default setting; see: Ö93.
Email address of the SND
Server as configured on the
POP3 server.
Command
Email address of the SND
Server as configured on the
POP3 server.
Command
TAN
Parameter and parameter