User manual

Administration Methods

mySND User Manual 23

The following commands are supported:

The following applies for the instructions:

• not case-sensitive

• one or more space characters are allowed

• max. length is 128 byte

• only the ASCII format can be read

Security with TAN

You will need a TAN for updates or parameter changes on the SND

Server. You will get a current TAN from the SND Server via email, e.g.

when receiving a status page. Enter the TAN into the first line of the

email body. A space character must follow.

Parameter Changes

Parameter changes are integrated into the email body with the

following syntax:

The syntax and values can be obtained from the parameter list, see:

Ö102.

Commands Option Description

[<command>] get status

sends the status page of the SND Server

get parameters

sends the parameter list of the SND Server

set parameters sends parameters to the SND Server.

The syntax and values can be obtained from

the parameter list, see:

Ö102.

Parameter and value must be entered into the

email body; see:

Ö23.

update SND Carries out an automatic update using the

software that is attached to the mail.

help Sends a page with information about the

administration via email.

[<comment>] Freely definable text for descriptions.