User manual

Administration Methods
mySND User Manual 22
2.3 Administration via Email
You can administer the SND Server via email and thus via any
computer with Internet access.
Functionalities
An email allows you to
• send SND Server status information
• define SND Server parameters or
• perform an update on the SND Server.
Requirements
; A DNS server has been configured on the SND Server; see:
Ö30.
; In order to receive emails, the SND Server must be set up as user
with its own email address on a POP3 server.
; POP3 and SMTP parameters have been configured on the SND
Server; see: Ö32.
Sending
Instructions via
Email
If you want to administer the SND Server, you must enter the
relevant instructions into the subject line of your email.
Proceed as follows:
1. Open an email program.
2. Write a new email.
3. Enter the SND Server address as recipient.
4. Enter an instruction into the subject line; see: ’Syntax and
Format of an Instruction’ Ö22.
5. Send the email.
ª The SND Server receives the email and carries out the
instruction.
Syntax and Format
of an Instruction
Note the following syntax for instructions in the subject line:
cmd: <command> [<comment>]