User manual

Administration Methods
mySND User Manual 17
2.1 Administration via the mySND Control Center
Which Functions Are
Supported?
The mySND Control Center comprises all features for the
administration and monitoring of the SND Server.
The mySND Control Center is stored in the SND Server and can be
displayed by means of a browser software (Internet Explorer, Firefox,
Safari).
The access to the mySND Control Center is controlled by means of
user accounts (
Ö42). Users authenticate themselves via a user
name and a password. Only users with administrator privilege have
access to the mySND Control Center.
S tart and Login
The login to the SND server is session-based. Up to 16 users can be
logged on to the SND server at the same time. For further
information; see:
Ö72.
Requirements
; The SND Server is connected to the network and the mains
voltage.
; The SND Server has a valid IP address.
; The used user account has administrator privileges; see: Ö42.
The user account 'Admin' and the password 'admin' have been
configured by default. Change the password when you use the SND
server in a real situation; see: Ö42.
Proceed as follows:
1. Open your browser.
2. Enter the IP address of the SND Server as the URL.
The login page appears.
If the login page is not displayed, check the proxy settings of your browser.
3. Enter the user name and password of a user account.
4. Click Login.
The mySND File Browser will be displayed in the browser.
5. Click Control Center.