User manual

Appendix - Parameter List
mySND User Manual 114
Table 26: Parameter List - Automatic File Transfer
Parameters Value Default Description
autoSndPDMedia on/off on Enables/disables the
automatic file transfer from
USB mass storage devices.
autoSndPDRcp_1
autoSndPDRcp_2
[Recipient 1,
Recipient 2]
valid email address
[max. 64 characters]
[blank] Defines the email address of
the recipient for the automatic
file transfer from USB mass
storage devices.
autoSndPDDir
[Source folder]
max. 64 characters
[/, a-z, A-Z, 0-9]
/
[Root
directory]
Defines the folder on USB
mass storage devices from
which the files will be
transferred automatically.
The content from subfolders
will not be transferred.
autoSndPDExt
[File types]
max. 32 characters
[., a-z, A-Z, 0-9]
[blank] Defines the file types that are
transferred automatically from
USB mass storage devices by
their file extension.
- Schema: .<Extension>
- File types without extension
will be defined by a dot.
- Multiple entries are to be
separated by blanks.
autoSNDPDaBit
[Set archive bit]
on/off on Marks files that are
transferred from USB mass
storage devices by an archive
bit. Marked files will not be
transferred again when the
removable medium is
reconnected to the SND
server.
No archive bit can be set with
read-only USB mass storage
devices.
autoSndSDMedia_1
~
autoSndSDMedia_16
on/off on Enables/disables the
automatic file transfer from
SD cards with media
assignment.
sdCardAutoRcp_1
~
sdCardAutoRcp_16
[Recipient]
valid email address
[max. 64 characters]
[blank] Defines the email address of
the recipient for the automatic
file transfer from SD cards
with media assignment.