User manual

Appendix - Parameter List
mySND User Manual 106
Table 16: Parameter List - POP3
Table 17: Parameter List - SMTP
Parameters Value Default Description
pop3
[POP3]
on/off off Enables/disables the POP3
functionality.
pop3_srv
[Server name]
max. 128 characters [blank] Defines the POP3 server via
the IP address or the host
name.
The host name can only be
used if a DNS server was
configured beforehand.
pop3_port
[Server port]
1–65535
[1-5 characters; 0-9]
110 Defines the port of the POP3
server used by the SND
Server for receiving emails.
When using SSL/TLS, enter
995 as port number.
pop3_sec
[Security]
0 = --- [no security]
1 = APOP
2 = SSL/TLS
0 Defines the authentication
method to be used.
pop3_poll
[Check mail
every]
1–10080
[1-5 characters; 0-9]
2 Defines the time interval (in
minutes) for retrieving emails
from the POP3 server.
pop3_limit
[Ignore mail
exceeding]
0–4096
[1-4 characters; 0-9;
0 = unlimited]
4096 Defines the maximum email
size (in Kbyte) to be accepted
by the SND Server.
pop3_usr
[User name]
max. 128 characters [blank] Defines the user name used
by the SND Server to log on to
the POP3 server.
pop3_pwd
[Password]
max. 128 characters [blank] Defines the password used by
the SND Server to log on to
the POP3 server.
Parameters Value Default Description
smtp_srv
[Server name]
max. 128 characters [blank] Defines the SMTP server via
the IP address or the host
name.
The host name can only be
used if a DNS server was
configured beforehand.