User manual

Appendix - Parameter List
mySND User Manual 103
Table 12: Parameter List - IPv4
Table 13: Parameter List – IPv6
Parameters Value Default Description
ip_dhcp
[DHCP]
on/off on Enables/disables the DHCP
protocol.
ip_bootp
[BOOTP]
on/off on Enables/disables the BOOTP
protocol.
ip_auto
[ARP/PING]
on/off on Enables/disables the IP
address assignment via
ARP/PING.
ip_addr
[IP address]
valid IP address 169.254.
0.0/16
Defines the IP address of the
SND Server.
ip_mask
[Subnet mask]
valid IP address 255.255.
0.0
Defines the subnet mask of
the SND Server.
ip_gate
[Gateway]
valid IP address 0.0.0.0 Defines the gateway address
of the SND Server.
Parameters Value Default Description
ipv6
[IPv6]
on/off on Enables/disables the IPv6
functionality of the SND
Server.
ipv6_auto
[Automatic
configuration]
on/off on Enables/disables the
automatic assignment of the
IPv6 address for the SND
Server.
ipv6_addr
[IPv6 address]
n:n:n:n:n:n:n:n : : Defines a manually assigned
IPv6 Unicast address in the
n:n:n:n:n:n:n:n format for the
SND Server.
Every 'n' represents the
hexadecimal value of one of
the eight 16 bit elements of
the address. An IPv6 address
may be entered or displayed
using a shortened version
when successive fields
contain all zeros (0). In this
case, two colons (::) are used.