User manual

Appendix - Glossary
mySND User Manual 101
InterCon-NetTool
The software InterCon-NetTool has been developed by SEH
Computertechnik GmbH for the administration of SEH network
devices within a predefined network.
IP Address
The IP address is the unique address of each node in a network, i.e.
an IP address may occur only once on a local network. The system
administrator usually assigns the IP address. The address must be
saved in the SND Server to make sure that it can be addressed within
the network.
mySND Control
Center
The SND Server can be configured and monitored via the mySND
Control Center. The mySND Control Center is stored in the SND
Server and can be displayed by means of a browser software
(Internet Explorer, Firefox, Safari).
mySND File Browser
The mySND File Browser is used to access files and to work with files
(download, etc.). The mySND File Browser is stored in the SND Server
and can be displayed by means of a browser software (Internet
Explorer, Firefox, Safari).
Subnet Mask
With the help of the subnet mask, large networks can be split up
into subnetworks. In this case, the user IDs of the IP addresses are
assigned to the various subnetworks. By default, the SND Server is
configured for the use without subnetworks. If you want to use a
subnetwork, you can configure the relevant parameter in the SND
Server via the mySND Control Center.