Installation guide

Quick Installation Guide [en] 15
 Configuring the SND server
The SND server can be configured and monitored via the mySND Control Center.
The mySND Control Center is stored in the SND server and can be launched by
means of an Internet browser (Internet Explorer, Firefox, Safari).
In order to access the mySND Control Center, you must log on to the SND server
first.
The user account 'Admin' and the password 'admin' have been configured by
default. Change the password when you use the SND server in a real situation;
see: mySND User Manual.
Make sure that:
- The SND server is connected to the network and the mains voltage.
- The SND server has a valid IP address.
Proceed as follows:
1. Open your browser.
2. Enter the IP address of the SND server as the URL.
The login page appears.
If the login page is not displayed, check the proxy settings of your browser.
3. Enter the user name 'Admin'.
4. Enter the password 'admin'.
5. Click Login.
The mySND File Browser will be displayed in the browser.
6. Click Control Center.
 The mySND Control Center will be displayed in the browser.