Installation guide

12 [en] Quick Installation Guide
9. Press to confirm. The display shows:
10. Press to confirm. The display shows:
 The settings will be saved.
Assigning TCP/IP Parameters Automatically (DHCP)
Make sure that:
- An active DHCP server is integrated into the network.
Use the navigation keys at the front of the device to assign the TCP/IP
parameters via DHCP.
Proceed as follows:
1. Press . The display shows:
2. Press .
The display shows the current IP configuration ('Manual' or 'DHCP'):
3. Select 'DHCP' via or and press to confirm. The display shows:
4. Press to confirm.
 The settings will be saved.
Upon booting DHCP will be applied automatically. TCP/IP parameters are assigned
by a DHCP server.
> Apply
< Back
Applying Network
Settings ...
IP Setup >
Cancel <
IP Configuration
Manual
> Apply
< Back