User manual

User’s Manual InterCon-PrintServer

7.8 Installation as a Network Printer (TCP-Ports)

This installation depends on the UNIX system used and therefore can not be universally described in

this manual.

The print server supports the TCP-Ports 9100 (lp1), 9101 (lp2), 9102 (lp3), 9103 (lp4) 9104 (lp5),

9105 (lp6), 9106 (lp7), and 2900 (lp8). Data sent to these ports will be printed on the selected printer

port.

The TCP/IP port numbers for each printer port may be configured without any restrictions.

For the variables used by your UNIX system please refer your UNIX system manual.

7.9 SINIX SPOOL V4.x

The installation for direct printing via the TCP-Ports of the print server and SINIX spool V4.x is

described below:

1) Install the IP address on the print server (

arp

ping

; see UNIX system manual).

2) Install a new server in the spool system:

xpadd -srv <server_name> -sp <priority>

Example:

xpadd -srv server1 -sp PRIORITY

3) Install a new supervisor in the spool system:

xpadd -spv <supervisor_name> -se <server_name>

Example:

xpadd -spv admin -se server1

4) Enter a new printer:

xpadd -dev <printer_name>

-da <hostname TCP-Port>

-su <supervisor_name>

-co <connection>

-aa -pc <printer_control_language>

Example:

xpadd -dev printer

-da 'IC0001FF 9100'

-su admin

-co LAN

-aa

-pc HP-LASERJET