User manual

ManualsBrandsSEH ManualsComputer equipmentINTERCON

User’s Manual InterCon-PrintServer

7.7.4 HP-UX

Under the UNIX System HP-UX the installation of the print server as a remote printer can be done

using the SAM Administration Tool, or by directly using the HP VUE (Visual User Environment).

1. System Administrations Manager (SAM)

After starting the SAM software tool select the

Printers and Plotters

option. Within this

menu please select

Printers and Plotters

. Go to

Add

Remote Printer/Plotter.

within the

Actions

menu. Here some entries are required.

Please enter the printer, remote printer and system names and activate the option certifying that the

remote printer is installed on a BSD System:

Printer Name __________________

Remote System Name __________________

Remote Printer Name __________________

[ Remote Cancel Model... ] rcmodel___________

[ Remote Status Model... ] rsmodel___________

[Printer Class... ]___________________

[ ] Make this the system default printer.

[ ] Allow anyone to cancel a request.

[ ] Remote printer is on a BSD system.

In our example the entries would be:

Printer Name printer___________

Remote System Name IC0001FF__________

Remote Printer Name lp1_______________

[ Remote Cancel Model... ] rcmodel___________

[ Remote Status Model... ] rsmodel___________

[Printer Class... ]_______________

[ ] Make this the system default printer.

[ ] Allow anyone to cancel a request.

[X] Remote printer is on a BSD system.

The remote printer name is the port name of the print server.

2. HP VUE (Visual User Environment)

After starting the HP VUE activate the

Printer/Plotter

manager icon. In the

List

select the

Printers/Plotters

option. Within the

Actions

menu select

Add Remote

Printer/Plotter...

, to do the required entries (see 1. System Administrations Manager

(SAM))

To print the status of the print server, use the

Printer/Plotter Manager

or, within a shell,

the

lpstat

program.