User manual

User’s Manual InterCon-PrintServer
74
7.7.1 IBM AIX (Version 3.x)
Log in as root, start SMIT and follow the menus as described below:
"DEVICES"
"PRINTER/PLOTTER"
"MANAGE REMOTE PRINTER SUBSYSTEM"
"CLIENT SERVICES"
"REMOTE PRINTER QUEUES"
"ADD REMOTE QUEUE"
Enter the parameters within this screen mask:
Name of QUEUE []
Queuing DISCIPLINE [first come first serve]
ACTIVATE the queue ? [yes]
Destination HOST []
Pathname SHORT FILTER [ ]
Pathname LONG FILTER [ ]
Name of QUEUE for remote printer []
The parameters for our example are:
Name of QUEUE [IC0001FF]
Queuing DISCIPLINE [first come first serve]
ACTIVATE the queue ? [yes]
Destination HOST [192.0.0.123]
Pathname SHORT FILTER [ ]
Pathname LONG FILTER [ ]
Name of QUEUE for remote printer [lp1]
„Name of Queue“ = Name of the Queue
„Destination HOST“ = Hostname or IP address of the print server
„Name of QUEUE ...“ = Logical printer of the print server
Compare the entries in the queue with
REMOTE PRINTER QUEUEDEVICES.
In some cases the queue must be restarted:
MANAGE LOCAL PRINTER SUBSYSTEM Æ LOCAL PRINTER QUEUES
Within
/etc/qconfig
this entry was added:
IC0001FF:
device=drp0
up=true
host=192.0.0.123
rq=lp1
drp0:
backend=usr/lpd/rembak
The installation is complete.