User manual

User’s Manual InterCon-PrintServer
55
6.3 Windows NT 4.0
In order to use the print server in Windows NT 4.0 networks you must install an IP address on to the
print server. The TCP/IP and LPD protocols must also be activated on the NT server.
6.3.1 Starting the TCP/IP Protocol under Windows NT
•
Click on
START
and activate the
Control Panel.
Now choose the
Network
icon.
In the
Protocols
menu you can install network protocols. Choose the
TCP/IP
protocol
and press to
OK
button.
•
You will now be asked to enter some TCP/IP address information. To configure the protocol you
need the IP address and the subnet mask of the network board of your server. Ask your network
administrator to get this address information. Now press the
OK
button.
Your Windows NT 4.0 Server now supports the TCP/IP protocol.