User manual

User’s Manual InterCon-PrintServer

NT 4.0), you must contact a workstation in the network via the ping command before using

the arp command for the first time. If this is not possible in your network you have to use the

Administration Tool (IPX protocol) for configuration.

arp -s <IP address> <Hardware address>

Example:

arp -s 192.0.0.123 00-c0-eb-00-01-ff

•

enter the PING command to assign the IP address to the print server

ping <IP address>

Example:

ping 192.000.000.123

Pinging 192.000.000.123 with 32 bytes of data:

Reply from 192.000.000.123: bytes=32 time=55ms TTL=32

Reply from 192.000.000.123: bytes=32 time=2ms TTL=32

Now the print server has saved its IP address and can be connected to the spooler system. You can

furthermore send print jobs via

ftp

to the print server.

6.2.3 Adding the Print Server to the Windows Print Manager

•

activate the

Print Manager

•

select the printer driver and choose

Properties

within the

Printer

menu.

•

Choose

Others ...

in the

Print Destination

menu.