User manual

User’s Manual InterCon-PrintServer
46
5.4 Activate a Password on the Print Server
If it is intended to use a print server password on the Novell file server, then this function must be
activated in the print server. Use the Administration Tool to activate the automatic password
mechanism in the
Netware
menu.
If this parameter is active, the print server logs on to the file server with a new password whenever it
restarts. The print server generates the password by randomly.
✘✘
This password can not be changed by the user. The print server and the Novell file server
interact together to generate a new password every time the print server is started.
5.5 Novell Protocol Types
The protocol type active on the Novell NetWare file server is automatically recognised by the print
server. Supported are IEEE_802.2, IEEE_802.3, Ethernet_II and SNAP (IEEE802.5 Token Ring).
After the start the print server tries to connect a Novell file server by using all supported protocol
types. Automatic protocol recognition is configured by the manufacturer.
You can use the Administration Tool, an Internet Browser or FTP to change the Frame Header Type to
your specific needs.