User manual

User’s Manual InterCon-PrintServer
42
address is printed on the print server. For example: if the hardware address is
00c0eb0001FF
, then
the name of the print server is
IC0001FF
.
In the
PCONSOLE
program’s main menu select
Print Queue Information
, press
ENTER
and a list of the print queues which are already configured will appear.
Now select a queue name and press
ENTER
, the
Print Queue Information
menu appears.
Example:
Printer
Select the menu
Queue Servers
and press
ENTER
. A list of the print servers configured for this
print queue is shown on the screen.
Press
INSERT
to configure a new print server for the selected print queue. All available print servers
will appear in a list. Now select the name of the print server and press
ENTER
.
Exit the
PCONSOLE
program by pressing
ESCAPE
several times. Your print server can be assigned up
to a maximum of 16 print queues.
The steps described above must be repeated for each print queue to be serviced.
If the print server needs to service print queues on other file servers in the network, you have to select
the other file server with
PCONSOLE
and repeat the installation on this server as described above.
Your print server is now installed as a Novell print server.