User manual

User’s Manual InterCon-PrintServer
41
5.3 Installation as a Novell Print Server
Use the PCONSOLE program to install the InterCon-PrintServer as a Novell print server. Within
the print server mode each print server requires its own USER connection.
5.3.1 Novell NetWare 3.x and 4.x (Bindery Mode)
To install the print server in Novell NetWare 3.x and 4.x (bindery mode) you have to:
•
activate the Netware 4.x bindery emulation for the context
•
enter the print server
•
create a print queue or select an existing one
•
assign the print server to a print queue as ‘queue server’
Installation can be done without rebooting the file server.
✘ ✘
Log in as supervisor on a workstation and start the Novell PCONSOLE program.
5.3.1.1 Setting up a print server
✘ ✘
Novell NetWare 4.x: Start the bindery emulation. Insert:set bindery = <context>
into the file server’s console. Activate the bindery mode in the PCONSOLE by
pressing the F4 key.
Select
Print Server Information
in the PCONSOLE program and press
ENTER
; a list of the print
servers which are already configured will appear.
Press
INSERT
and enter the name of the print server. Each print server has its own specific name
made up out of the two letters IC and the last three groups of its hardware address. This hardware