User manual

User’s Manual InterCon-PrintServer

3.1 Configuration via Internet Browser (HTTP/HTML)

The print server supports the HTTP/HTML protocol and can be configured using any HTML 3.x

compatible Internet Browser.

In order to use an Internet Browser you have to install the TCP/IP protocol on your PC or host. A

valid IP address must be registered on the print server.

To enter an IP address on the Print server, please use the Windows administrations tool (IPX

protocol) or the

arp

and

ping

programs (TCP/IP).

Edit the ARP table

arp -s <Internet address> <Hardware address>

Example:

arp -s 192.0.0.123 00-c0-eb-00-01-ff

✘ ✘

Within some operating systems, for example all Microsoft Windows systems (except Windows

NT 4.0), you must make contact with a workstation in the network using the

ping

command

before using the

arp

command for the first time. If this is not possible in your network

you have to use the Administration Tool (IPX protocol) for configuration.

Assign a new IP address to the print server.

ping <Internet address>

Example:

ping 192.0.0.123

Start your Internet Browser and enter the IP address of the print server. The print server will be

connected and its homepage will be displayed on the host computer.