User manual

User’s Manual InterCon-PrintServer
119
IDLE
[< sp >< dec.integer >]
< dec.integer >:=max.IdleTime
Shows and sets the time after which the print server host shuts down the FTP connection if the partner
FTP doesn’t sent any data. The value must be in range between 30 and 7,200 seconds.
The pre-set value is 900 seconds.
LOAD
[< sp > ON | OFF]
Shows the name of the binary file expected for download via tftp, shows and sets the print server
status. In 'ON'-status, no print jobs will be accepted and the download mode will be activated. In the
'OFF'-status, the print server is ready for printing, which is the normal status.
STP
Causes the printout of a status page on the printer
Because the FTP command SITE is not supported by all operating surfaces (some implementations
know the site command) the SITE command has to be entered with the help of quote. For example:
ftp> quote SITE IDLE
200 Current IDLE time limit is 900 seconds; max 7200.
ftp> quote SITE IDLE 300
200 Maximum IDLE time set to 300 seconds.
ftp>