User manual

User’s Manual InterCon-PrintServer
115
10.8 Shellscript
Here all variables that can be modified during the installation of the network printer are displayed:
HOST:
Hostname of the print server. The default setting
HOST=_HOST_
must be changed to:
HOST=<Hostname of print server>
Example:
HOST=IC0001FF
PORTS:
Name of the destination file when sending data to the print server via FTP.
This specifies the chosen printer ports of the print server. The default setting
PORTS=lp1,lp2,lp3,lp4,lp5,lp6,lp7,lp8
specifies all logical printer ports of the print server. If you want your print data
to be printed by a specific logical printer, you must select that logical printer
port.
For example:
PORTS=lp2
FTP:
contains the complete path of the FTP command. The default setting
FTP=ftp
must be modified depending on the UNIX system used; for system V UNIX or
AIX for example to:
FTP=/usr/bin/ftp
and for BSD UNIX for example to:
FTP=/usr/ucb/ftp
WAIT:
contains a delay time in seconds. The default setting:
WAIT=1
can remain unchanged.
MAXR:
contains a loop counter. This loop counter determines the behaviour of the script
if the print data could not be transmitted; for example, if the selected printer