User manual

User’s Manual InterCon-PrintServer
112
TCP/IP Parameter
In the menu TCP/IP, the DHCP protocol can be turned on and off, the Subnet Mask, Gateway and
the IP Address can be changed.
Choose Menu Point: Button „ + “ and „ - “
Choice:
ENTER
Move Cursor: Button „Form Feed“ and „Cancel“
Change Address: Button „ + “ and „ - “
Save Configuration:
ENTER
APPLE / EtherTalk Protocol
EtherTalk Protocol:
ENTER
OFF / ON: Button „ + “ and „ - “
Save Configuration:
ENTER
Next Option: Button „ + “
10.4.2 Configuration via Prescribe Commands
When IC59/69/79 and Kyocera printers are used with KUIO interfaces, several print server
parameters can be changed using Prescribe sequences:
!R!SIOP2,"IPX:0";EXIT;
Novell NetWare Protocol off
!R!SIOP2,"IPX:1";EXIT;
Novell NetWare Protocol on
!R!SIOP2,"APPLE:0";EXIT; A
pple EtherTalk Protocol off
!R!SIOP2,"APPLE:1";EXIT; A
pple EtherTalk Protocol on
!R!SIOP2,"IP:192.168.000.149";EXIT;
Setting an IP-Address
!R!SIOP2,"SUBNET:255.255.255.000";EXIT;
Setting a TCP/IP Net Mask
!R!SIOP2,"DEFAULT:192.168.000.004";EXIT;
Setting a Gateway Address
Create a file using an editor of choice. Insert one of the above listed commands into this file and
transfer it as a print file to the Kyocera printer. The file can be transferred using one of the available
printer ports (parallel, serial, OPTION). For further Prescribe commands please read the printer
manual.
✔
Should a password be set on the PrintServer then any changes made using Prescribe
commands are ignored.