User manual

User’s Manual InterCon-PrintServer
111
Network Menu
Choose the „Interface - Option“ menu. Press „
FORMFEED“
. This
should allows the user to access the Novell NetWare menu.
Novell NetWare
In order to switch the Novell protocol on or
off, the user must press „
ENTER
“ button
and then either the „+“ or „ - “ button. In
order to confirm the input „
ENTER
“ button
must be pressed. Via the „
Form Feed
“
button the user can access the Novell sub-
menu where the Novell Frame Header can be chosen (for control instructions see how to switch
Novell protocols on and off).
Opt. Status Page
Opt. Status page:
ENTER
OFF / ON: Button „ + “ and „ - “
Save Configuration:
ENTER
Next Option: Button „ + “
TCP/IP Protocol
TCP/IP Protocol:
ENTER
OFF / ON: Button „ + “ and „ - “
Save Configuration:
ENTER
TCP/IP Sub-menu: Button „Form Feed“
Whenever the TCP/IP protocol is switched off, all other „active“ TCP/IP protocols (BOOTP,
DHCP, RARP) are also automatically switch off.