User manual

User’s Manual InterCon-PrintServer
110
10.4 Kyocera Print Server (IC59, IC69, IC79)
10.4.1 Configuration via Printer Panel
The following parameters can be changed using the Kyocera printer panel.
•
TCP/IP (IP Address, Net Mask, Gateway Address)
•
DHCP Protocol
•
APPLE Protocol
•
NOVELL NetWare Protocol (Frame Header)
Display for KYOCERA FS-3700+ (similiar to FS-7000)
Display for KYOCERA FS-800
✔
The following parameters were changed using KYOCERA FS-3700+. Please take note that
the printer has the correct firmware installed in order to support the panel mode.
Should a password be set on the print server then all settings made using the printer panel are
ignored.