User manual

User’s Manual InterCon-PrintServer
101
10 Appendix
10.1 General Parameters
General Parameters
Parameter Default Description
info
empty Information string on status page
passwd
empty Configuration password
Password for write community
Token Ring Parameter
Parameter Default Description
tr_speed
Jumper on print server
(see Technical Manual)
Token Ring Speed
tr_etr off
Early Token Release
tr_sri off
Source Routing
tr_laa 00:00:00:00:00:00
Logical Hardware Address
TCP/IP Parameters
Parameter Default Description
ip_address 000.000.000.000
IP address
ip_net_mask 000.000.000.000
Network Mask
ip_gateway 000.000.000.000
Gateway address
ip_dhcp off
DHCP protocol
ip_bootp on
BOOTP protocol
ip_rarp on
RARP protocol
ip_autoconf on
Accepts a new IP address via ARP
System Parameters
Parameter Default Description
sys_contract empty
Name or person who administrates the
printer (MIB-II parameter)
sys_name ICxxxxxx
Printer name (MIB-II parameter)
sys_location empty
Printer’s physical location (MIB-II
parameter)
SNMP Parameters
Parameter Default Description
snmp_ip_trap1 000.000.000.000
IP Trap address No. 1
snmp_ip_trap2 000.000.000.000
IP Trap address No. 2
snmp_ipx_trap1 00:00:00:00:00:00:00:00:00:00
IPX Trap address No. 1
*
(Network No. + Node address)
snmp_ipx_trap2 00:00:00:00:00:00:00:00:00:00
IPX Trap address No. 2
*
(Network No. + Node address)
snmp_trap_com public
Trap community
snmp_trap_aut on
Trap authentication