Specifications

September 2011 22743-00001 ab

Recommended Segway PT Pre-Ride Checklist for Tours

Thoroughly inspect all your Segway Personal Transporters (PT) before each day’s use. See the

Segway PT Reference Manual and this guide for more information concerning the below checks.

Beginning of Day

Check tire pressure for the PTs

being used on tour

15 PSI – i2

4 PSI – x2 & x2 turf

Check for tire wear

i2 – center rib worn flush with tire

surface

x2 – center rib diamond pattern not

visible

x2t – tread depth below 3/32”

(2.38 mm)

Check the LeanSteer Frame for

tightness

Torque to 11 N-m

Before Each Tour

Power on the Segway PT,

confirm the battery level

displayed on the InfoKey is at 4

bars minimum

Ensure that there is no visible

damage to the PT

Check that the LeanSteer Frame

is standing straight and upright

as illustrated below

Ensure the rider mats are intact,

secured, and free of debris

Prior to each tour, press on the

tires to ensure that they have

not been punctured or

compromised in any way during

the previous tour

LeanSteer Frame

straight and upright