Specifications

September 2011 22743-00001 ab

Recommended Segway PT Pre-Ride Checklist

Thoroughly inspect your Segway Personal Transporter (PT) before each use. See the Segway PT

Reference Manual and this guide for more information concerning the below checks.

Check tire pressure

15 PSI – i2

4 PSI – x2 & x2 turf

Check for tire wear

i2 – center rib is worn flush with the tire surface

x2 – diamond pattern on center rib is no longer visible

x2t – tire tread depth is less than 3/32” (2.38 mm)

Power on the Segway PT, confirm the battery level displayed on

the InfoKey is at 4 bars minimum

Ensure that there is no visible damage to

the PT

Check that the LeanSteer Frame is

standing straight and upright as

illustrated here

Check the LeanSteer Frame for tightness

Torque to 11 N-m

Ensure the rider mats are intact, secured, and free of debris