Specifications

September 2011 22743-00001 ab

Recommended Segway PT Maintenance Schedule

Product: Date:

Serial Number: Mileage:

Inspected By: Hours:

Monthly Checks Circle Accordingly

Check LeanSteer installation and torque – 11 N-m Yes No Repaired Replaced

Check tire wear and pressure – i2 = 15 PSI; x2 = 4 PSI Yes No Repaired Replaced

Ensure rider mats are intact, secured, and free of debris Yes No Repaired Replaced

Inspect handle bar grips for proper installation excessive wear Yes No Repaired Replaced

Inspect docking station for condition and functionality Yes No Repaired Replaced

Inspect fenders for cracks and obstructions Yes No Repaired Replaced

Check operation of height adjustment knob Yes No Repaired Replaced

Power on PT. Ensure operability and document hours/miles Yes No Repaired Replaced

Quarterly Checks Circle Accordingly

Check torque of all Fasteners: *Note: Only check with proper torque tool

Perform all monthly checks

Handle bar clamp = 6 N-m Checked Did not check

InfoKey dock = 2 N-m Checked Did not check

Batteries = 1.6 N-m Checked Did not check

Wheel = 30 N-m Checked Did not check

Fascia/Parking stand = 1.5 N-m Checked Did not check

Gearbox Trim = 6 N-m Checked Did not check

Fender = 1.5 N-m Checked Did not check

Perform Function Checks

Check InfoKey operation for proper functionality Checked Did not check

Check InfoKey battery level (see PT Reference Manual) Checked Did not check

Inspect LeanSteer for damage Checked Did not check

Semi-Annually Circle Accordingly

Perform monthly and quarterly checks Yes No

Replace tires and handle bar grips as required Checked Replaced

Test ride PT, note any wheel alignment, drift, or performance issues Yes No

Annually Circle Accordingly

Perform monthly, quarterly, and semi-annual checks Yes No

Dealer to inspect elastomer and coupling as outlined in SB10-001 Yes No

Replace components and update software as necessary, factory

technicians only

Yes No