User manual

68
Step 4: Before Stepping On
The Segway PT is on, but it is not balancing. While standing behind the PT,
center the Handlebar and level the Powerbase. Use the Balance Indicator
lights to help you. If any of the four outer Balance Indicator lights are red, tilt
the Powerbase or Handlebar in the opposite direction of the light(s). When
the PT is ready to enter Balance Mode, the center Balance Indicator light
will light up green. Make sure your InfoKey Controller is installed in the Dock
prior to stepping on.
When the center Balance Indicator light is green, the PT is in Riderless
Balance Mode, ready for you to step onto the Mats (see Table 3: Balance
Indicator Light Patterns, p. 31).
Figure 42: Ensure Balance Indicator is Green
Green
Red