User manual

66
Step 2: Powering On the Segway PT
Using the InfoKey Controller, power on your PT by pressing the Power/
Standby button. The Power/Standby button is located on the bottom left-
hand side of the InfoKey Controller.
You will hear a tone from the PT and the Balance Indicator lights will illuminate
to indicate the power is ON and the PT is in Standby Mode.
WARNING
Do not step onto the PT yet! The PT is powered on, but is not balancing.
Figure 40: Balance Indicator Lights
Balance Indicator lights
Figure 39: Powering On the PT
Power/Standby button