User manual
56
Stick Shake Warning (cont.)
Rider Off
You do not have to be riding the PT for the Stick Shake Warning to occur. The
Stick Shake Warning occurs if the PT is moved too quickly while in Riderless
Balance Mode. Riderless Balance Mode is when the PT is in Balance mode
without a rider standing on the Powerbase. The Stick Shake Warning also
occurs if the Wheels spin as you pull the PT over a curb or up stairs.
Table8 lists possible causes of the Stick Shake Warning and recommended
actions to take when the Stick Shake Warning occurs with no Rider on the
Mats.
Possible Causes Recommended Action
Moving a PT too
quickly with no rider
on the Powerbase
while in Riderless
Balance Mode.
When moving your PT in Rider-
less Balance Mode, you must
move slowly and carefully. Always
keep the PT below you (lead it up
stairs or slopes and keep it below
you when descending stairs or
slopes) (p. 78).
Stepping on the PT
when it is powered
on, but not ready for
you to step on.
Step off, center the LeanSteer
Frame, and level the Powerbase.
Once the center Balance Indica-
tor light turns green (p. 69), step
on again.
Table8:StickShakeWarningWithNoRideronMats