User manual

48
InfoKey Controller (cont.)
Button Combination Functions
The following functions require you to simultaneously push a combination of InfoKey Controller buttons.
Unlocking and Locking the Beginner Setting
For your first ride, the PT is set to operate exclusively with the Beginner Setting enabled. If the Beginner icon (turtle) does not display, do NOT
ride the PT until you enable the Beginner Setting. The PT ships from the factory with the Beginner Setting locked, to encourage new riders to
learn using the Beginner Setting.
To unlock the Beginner Setting:
1. Power on the PT.
2. Press and hold the Beginner Button and the Information Display Button simultaneously for more than 10 seconds. The Information
Display button will flash.
3. Make sure the PT has not entered Balance Mode.
4. Confirm that the Beginner icon (turtle) toggles when the Beginner button is tapped.
Once the Beginner Setting is unlocked, you can toggle the Beginner Setting on or off by tapping the Beginner button.
To lock the Beginner Setting:
1. Repeat Steps 1 and 2 above.
2. Confirm that the Beginner icon (turtle) is showing on the InfoKey Display.
3. Test the lock by tapping the Beginner button and confirming that the Beginner icon remains showing in the InfoKey Display.