User manual

46
InfoKey Controller (cont.)
Setting Speed/Distance Format, Date Format, Year, Month, and Day (cont.)
2. Set Date Format (MO.DA or DA.MO)
Select the MO.DA (Month.Day) or DA.MO (Day.Month) format by tapping the Security button until the desired format is displayed.
Tap the Information Display button to confirm and advance to the year setting.
3. Set Year
Select the year by tapping the Security button until the desired year is displayed. Press and hold the Security button to fast-advance
years. Tap the Information Display button to confirm and advance to the month setting.
4. Set Month
Select the month by tapping the Security button until the desired month is displayed. Press and hold the Security button to fast-
advance months. Tap the Information Display button to confirm and advance to the day setting.
5. Set Day
Select the day by tapping the Security button until the desired day is displayed. Press and hold the Security button to fast-advance
days. Tap the Information Display button to confirm speed/distance format, date format, year, month, and day. These are now set.
Setting Speed Limits and Shutdown Timeout
Speed Limit:
Press and hold the Information Display button until the odometer is shown on the screen. Then, hold the Information Display button for about
two (2) seconds, until you see the Beginner ("SPD1") speed limit. The InfoKey controller screen will alternate between "SPD1" and the current
Beginner speed limit setting. Tapping the Security button will show the next available speed limit. Beginner Setting speed limit options range
from 4.0 mph to 8.0 mph in 0.5 mph increments. Once your preferred Beginner Setting speed limit is shown on the screen, press the Informa-
tion Display button again to save the Beginner Setting speed limit. The Infokey controller screen will now alternate between "SPD2" (Standard
Setting) and the current Standard speed limit. Tapping the Security button will show the next available speed limit. Standard Setting speed
limit options range from 4.0 mph to 12.5 mph in 0.5 mph increments. Once your Standard Setting speed limit is shown on the screen, press the
Information Display button again to save the Standard Setting speed limit. The Infokey controller screen will now alternate between the current
Shutdown Timeout setting and "-OFF".