User manual

41
Icon Description
Information Display
Displays time, date, speed, average speed, trip distance, and odometer. (p. 44)
Wrench
Indicates a system fault that requires service; also displayed during a Safety Shutdown. (p. 132)
Face
A series of face icons display to indicate status. You may see a happy, sad, or neutral face depending on
the current status of the PT.
Security
Indicates the security function is activated. (p. 47)
Beginner
Indicates Beginner Setting is enabled (top speed and turning sensitivity set at lower rates). (p. 43)
InfoKey Controller
Link Signal
Indicates the InfoKey Controller has detected the PT. The InfoKey Controller must be within 15 ft. (5 m)
in order to communicate with the PT.
Rider Detect Error
Displays if any two of the four Rider Detect Sensors (two located beneath each Mat) are not depressed
while you are riding. Displays in Standby Mode if you attempt to step onto a PT that is not ready to ride,
and displays at startup if there is any weight on the Mats. (p. 33)
AC Power
Indicates the PT is plugged in to AC power. (p. 87)
InfoKey Controller
Low Battery
Indicates the InfoKey Controller battery must be replaced. (p. 115)
Segway PT
Battery Gauge
Indicates the amount of power remaining in the PT Batteries. (p. 90)
Warning
Indicates a warning condition caused by factors such as aggressive riding, system operating outside of
temperature range, rider lifting foot off of Mat, etc.
Table 5: InfoKey Controller Icons