User manual

30
Segway PT Components and Subsystems (cont.)
Balance Indicator Lights
Five Balance Indicator lights are located on the Console. These lights provide
visual feedback about the balancing status of the PT, and help the rider de-
termine when it is safe to step onto the Mats (see Figure 16).
Table 3 describes the Balance Indicator light patterns, and the correspond-
ing balance status of the PT.
Red Balance Indicator lights indicate that the Powerbase or LeanSteer Frame
are tilted, and the PT is not ready to be stepped on:
• One red left or right Balance Indicator light
Pivot the LeanSteer Frame in the opposite direction of the red light,
until the LeanSteer Frame is vertical, and the red Balance Indicator
lights are replaced by one green Balance Indicator light in the center.
• One red front or rear Balance Indicator light
Tilt the Powerbase in the opposite direction of the red light, until the
Powerbase is level, and the red Balance Indicator lights are replaced
by one green Balance Indicator light in the center.
• Two adjacent red Balance Indicator lights
Move both the LeanSteer Frame and the Powerbase in the opposite
direction of the lights until the red Balance Indicator lights are re-
placed by one green Balance Indicator light in the center.
• Five red Balance Indicator lights
Ensure LeanSteer Frame is vertical, Powerbase is level, Wheels
are not moving, and wait until the red Balance Indicator lights are
replaced by one green Balance Indicator light in the center.
Figure 16: Balance Indicator Lights
Green
Red