User manual

143
Recommended Maintenance Schedule–i2 SE, x2 SE, x2 SE Turf (cont.)
Maintenance procedure: 1x/month 1x/4months 1x/6 months 1x/12 months
Replace tires (see "Tire Wear" below), handle bar grips as necessary
 
Test ride PT, note wheel alignment, drift, or performance issues
 
Inspect elastomer and coupling (see SB 10-001)
2

Replace components and update software as necessary
3

Tire Wear
Excess tire wear is determined as follows:
• Model i2 SE – center rib is worn flush with tire surface
• Model x2 SE – diamond pattern on center rib is no longer visible
• Model x2 SE Turf – tire tread depth is less than 3/32" (2.38 mm)
Key:  = required;
2
= Performed by Level 2 trained Segway Certified Technician only;
3
= Performed by Level 3 trained Segway Certified Technician only