User manual

142
Maintenance procedure: 1x/month 1x/4months 1x/6 months 1x/12 months
Check LeanSteer installation and torque: 11 N-m
   
Check tire wear and pressure: i2 SE = 15 PSI; x2 SE = 4 PSI
   
Ensure rider mats are intact, secure, and free of debris
   
Inspect handle bar grips for proper installation/excessive wear
   
Inspect docking station for condition/functionality
   
Inspect fenders for cracks/obstructions/debris
   
Check operation of height adjustment knob
   
Power on PT. Ensure operability and document hours/miles
   
Check fastener torque: Handle bar clamp = 6 N-m
  
Check fastener torque: InfoKey dock = 2 N-m
  
Check fastener torque: Batteries = 1.6 N-m
  
Check fastener torque: Wheel = 30 N-m
  
Check fastener torque: Fascia/Parking stand = 1.5 N-m
  
Check fastener torque: Gearbox Trim = 6 N-m
  
Check fastener torque: Fender = 1.5 N-m
  
Function check: InfoKey operation
  
Function check: InfoKey battery level
  
Function check: Inspect LeanSteer for damage
  
Recommended Maintenance Schedule–i2 SE, x2 SE, x2 SE Turf
Key:  = required,
2
= Performed by Level 2 trained Segway Certified Technician only,
3
= Performed by Level 3 trained Segway Certified Technician only