User manual

131
Pitch or Roll Angle Exceeded
If the Segway PT shuts down because a forward/backward (pitch) or side
(roll) tilt limit was exceeded, or no Rider Detect sensors were depressed
while the PT was moving at speed, the icon shown in Table18 will appear on
the InfoKey Controller.
The PT is programmed to shut down in these situations because the rider is
not in control of the PT.
To clear this condition, follow the instructions in the Recommended Action
column in Table18.
Table18:IconforTiltLimitsExceeded
Display Icon Description Recommended
Action
The Segway
PT shut down
because a
forward/
backward
(pitch),
or side tilt
limit was
exceeded,
or no Rider
Detect
sensors were
depressed
while the PT
was moving
at speed.
Check the Segway
PT for damage. If
there is no damage,
turn the power
on by tapping the
Power/Standby
button on the
InfoKey Controller.