User manual

99
Cleaning Your Segway PT
WARNING
Do not clean the Mat or Tires with any specialized cleaners. Use of such products may reduce traction, increasing the risk of a fall.
To clean your Segway PT:
1. Make sure the PT is unplugged and powered off.
2. Always close the Charge Port Cover after charging and prior to cleaning.
3. Gently clean your Segway PT with soap and water and a soft cloth.
Avoid Submerging Your Segway PT
WARNING
Do not wash the Segway PT with a power washer or high pressure hose. Avoid
getting water into the Charge Port. Always close the Charge Port Cover after
charging. Avoid exposure to heavy downpours or extended periods of heavy
rain (including during riding, storage, or when transporting). Clean with soap
and water and a soft cloth. Make sure that the Charge Port is dry before you
plug in the Power Cord. Failure to follow these instructions could expose you
to electric shock, injury, burns, or cause a fire.
WARNING
Do not submerge the Batteries or powerbase in water. If you suspect the Bat-
teries or powerbase have been submerged or experienced water intrusion,
call Segway Technical Support immediately at 1-866-473-4929, prompt #2.
Until you receive further instructions, store the PT upright, outdoors, and
away from flammable objects. Do not attempt to remove the batteries. Do
not plug the Power Cord into the PT. Failure to follow these instructions could
expose you to electric shock, injury, burns, or cause a fire.
Figure 62: Avoid Submersion