User Manual

1413

5. Insert the front wheel axle and

ensure that it goes through the

front fork and wheel respectively.

6. Use an 8 mm Allen wrench to

tighten the nuts on both sides of

the wheel.

7. Use a 4 mm Allen wrench to tighten

the 4 bolts on the front fork.

Please hide the exposed strips behind the number plate.

Install Front Fender

Take oﬀ the 3 bolts and install the front fender. Use a 4 mm Allen wrench to tighten the bolts and make sure they are

securely fastened.

Install Front Number Plate

1. As shown below, ensure that the 4 Nylon strips go

through the holes on the number plate.

2. Tighten the strips and aﬃx the number plate on the

front fork.

Install Right Foot Peg

1. Place the foot peg in the installation position. 2. Use a 14 mm open-end wrench to tighten the nut.