Se g way D i r t e B i ke Use r M a nu a l The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot App to download the latest user materials. You must install the App, activate your Segway Dirt eBike and obtain the latest updates and safety instructions. www.segway.
California Proposition 65 NO PASSENGERS 1 person only! This vehicle is designed as an operator-only model. The motorcycle loading WARNING Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can limit and seating configuration do not safely allow the carrying of a passenger.
Welcome Contents 1. Riding Safety 01 2. Components and Functions 04 3. Package Contents 08 4. Assembly 10 5. Preparation Before Riding 15 6. Learn to Ride 18 7. Notes on Usage and Operation 24 8. How to Charge 26 9. Transporting and Storing Your Vehicle 29 10. Maintenance 30 11. Troubleshooting 36 12. Specifications 38 13. Certifications 40 14. Trademark and Legal Statement 41 15.
1 Riding Safety Please follow local laws and traffic rules strictly. Do not ride Segway Dirt eBike on public roads, as this product is for off-road use only. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the Segway Dirt eBike you risk injury from loss of control, collisions, and falls. RIDE AT YOUR OWN RISK AND USE COMMON SENSE. 1.
When Riding 2 Components and Functions 1. Always wear a helmet and protective gear. Use an approved motorcycle helmet that meets the local safety standards. Wearing protective gear like knee pads and elbow pads are highly recommended. Please identify each part and familiarize yourself with them. The diagrams below use Segway X260 2. Do not ride under the influence of drugs or alcohol and avoid riding when tired or fatigued. as an example. Actual product may vary. 3. Do not exceed the speed limit.
Left Side View Right Side View Rear shock absorber Vehicle charging port Battery compartment lock Insert the key and turn counter clockwise to open Headlight For X260 only Tail fender Front number plate Battery compartment cover For X260 only Vehicle frame Rear fender Front shock absorber Front wheel Front disc brake pump Motor controller Kickstand (with built-in sensor) When the kickstand is put down, the motor will not start when you rotate the accelerator 05 Rear disc brake pump Rear whe
3 Package Contents Location of Important Labels CAUTION We have provided important safety notice on labels and in this user manual. For the safety of you and others, please make sure to read labels on the vehicle and packaging materials. Do not remove any labels from the vehicle. App activation label Warning label Main switch safety label High Voltage warning label Exposure to high voltage can cause burns, shock, and even death. Do not cut, probe, tamper with, or modify high voltage cables or wiring.
4 Assembly Please follow the instructions to assemble the vehicle. Improper assembly can lead to rider injury or User Manual Quick-start Guide vehicle damage. Limited Warranty and Dispute Resolution Install Handlebar User Manual Quick-start Guide Limited Warranty and Keys x 2 Dispute Resolution 1. Use a 4 mm Allen wrench to loosen the 4 lock screws (with washers) and take off the handlebar stem cap. 2. Install the front brake lever, then the accelerator on the handlebar. * Do not tighten the nuts.
Install Headlight (for X260 only) 1. Affix the headlight to the installation plate on the front fork. Install Front Wheel 2. Install the headlight, adjust to the right angle and tighten the lock bolts on both sides. 1. Use a 4 mm Allen wrench to loosen the 4 bolts on the front fork. 2. Use an 8 mm Allen wrench to take 3. Put the axle plug on both sides of off the 2 nuts on the front wheel the front wheel. Be careful not to axle, then knock gently to take out damage the sealing ring.
Install Front Fender 5. Insert the front wheel axle and 6. Use an 8 mm Allen wrench to ensure that it goes through the tighten the nuts on both sides of front fork and wheel respectively. the wheel. 7. Use a 4 mm Allen wrench to tighten the 4 bolts on the front fork. Install Front Number Plate 1. As shown below, ensure that the 4 Nylon strips go through the holes on the number plate. Take off the 3 bolts and install the front fender.
Install Battery 5 Preparation Before Riding NOTICE Download App ● Before installing the battery, please turn off the electric lock and flip left to turn off the main switch, then cover the charging port sealing cap. ● The communication plug must be connected, otherwise the vehicle cannot identify the battery specifications. Before your first ride, you must log in to Segway-Ninebot App to activate your new Segway Dirt eBike. Scan the QR code to download Segway-Ninebot App (iOS version 1.
Please make sure you have checked all items mentioned in Riding Safety, especially: Tire and tire pressure Make sure the tires are in good condition and tire pressure remains 32.6 psi (225 kPa). Low tire pressure can cause abnormal wear and poor steering, lower speed and shorter range. High tire pressure can cause abnormal wear, riding discomfort, and even tire blowout. Check whether the spokes of the wheels are loose.
Adjust Speed WARNING Do not brake abruptly. Using only one brake can cause rollover, skidding and serious danger. Rotate the accelerator inwards to accelerate. Release to stop accelerating. If you squeeze the rear brake suddenly while driving, your vehicle may skid. stop acceleration SPORT EP accelerate SPORT EP Skidding WARNING ● Rotate the accelerator gently to avoid accidents or damages to vehicle parts. ● For new riders, it is important to start with EP mode.
Parking Safety Warnings Avoid all dangerous behaviors and do not ride under the influence. Slow down and find a parking location. When the vehicle has stopped, turn it off and remove the key, then place down the kickstand to support the vehicle. CAUTION Park on a flat and stable surface. Do not park the vehicle on slopes or soft ground.
7 Notes on Usage and Operation You many encounter the following situations when using the Segway Dirt eBike. For a longer service life, please also take note of the points below: 1. Power Cutoff The motorcycle is turned on but the power output is cutoff in the following conditions: ● Power off when braking (when braking, if you rotate the accelerator, there will not be any power output) slow * You can enable and disable power off when braking in Braking via App.
3. About Riding Environment When the temperature is lower than 32°F (0℃), the battery will only have 80% of its normal capacity. In this condition, we strongly suggest that you do not use SPORT mode. When the temperature is above 122°F (50℃), do not ride at full power for a long period of time or else the Segway Dirt eBike may overheat. 8 How to Charge Charge the Vehicle Connect the charger output to the vehicle charging port, then plug the charger into a power socket.
Charge the Battery 1. Make sure the electric lock is turned off. Open the battery compartment and turn off the main switch. 4. Connect the charger output to the battery charging port and then plug the charger into a power socket. * When charging, the charger indicator flashes red. When the battery is full, the indicator turns green. Please disconnect the charger from the power socket when fully charged, and turn the main switch on after you reinserted the battery into the Segway Dirt eBike. WARNING 2.
9 Transporting and Storing Your Vehicle 10 Maintenance Transporting I. Maintenance Guideline When you need to transport your Segway Dirt eBike, it is recommended to use soft ratchet straps to secure your vehicle. Use two ratchet straps in the front and two in the rear. Place the straps around a frame contact point. Check that the straps do not contact any control cables or electrical wirings. Tighten the straps until the front suspension is compressed about half-way.
● Replacement of front sprocket (large and small pulley and 14-tooth sprocket) in motor: once every 4971 miles (8,000 km), simultaneously with the chain ● Brake pad replacement: when its thickness is less than 0.5 mm ● Brake disc replacement: when the braking surface of the disc is less than 1.5mm thick ● Vehicle bearing replacement: abnormal sound and loosening ● Tire replacement: less than 2/3 of the tread depth of a new tire Stay safe during inspection 1. Park the vehicle in an open and flat location. 2.
* NOTE Fuse replacement 1. Before removing and installing the battery, turn off the electronic lock and turn off the main switch. Then, cover the rubber seal cap of the charging port. If the dashboard, horn, and light do not work after the main switch and electric lock are enabled; it indicates a blown fuse. If this occurs, please replace the fuse. 2. Do not force the battery into the battery compartment.
II. Recommended Maintenance Schedule 11 Troubleshooting 1. Mandatory maintenance in the “Recommended Maintenance Schedule” below must be performed at an authorized service center. All Segway Dirt eBikes are carefully inspected before they are delivered. Even so, some technical issues 2. Failure to implement mandatory maintenance timely will be regarded as the abandonment of the warranty. Maintenance items When you cannot solve the problem, take it to an authorized dealer or reach us.
Problem Possible Causes 1. The charger plug falls off or the 5 Charger does not work connection is loose 2. The battery connection falls off or is loose 6 Vehicle makes abnormal The chains don’t have the noise when riding right tension Corresponding Solution 12 Specifications 1. Fix the plug or connector firmly 2. Open the battery compartment cover and plug Item X160 X260 Dimensions: Length × Width × Height 71.7 × 29.1 × 40.2 inch (1820 × 740 × 1020 mm) 74.2 × 30.7 × 41.
Other Features Item X160 X260 Wheel Diameter 17 inch 19 inch Handlebar Grip Material Silicone rubber Silicone rubber Front Shock Absorber System Single-shoulder inverted front fork (adjustable) Double-shoulder inverted front fork (adjustable) Rear Shock Absorber System Multi-link hydraulic spring central type Multi-link hydraulic spring central type Rear Shock Absorber Range 3.0 inch (75 mm adjustable) 3.
14 Trademark and Legal Statement Appendix: Electric Schematic Diagram of the Vehicle Segway and the Rider Design are the registered trademarks of Segway Inc.; Ninebot is the registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; SUR-RON、SURRON are trademarks of Hangzhou Qiulong Technology Co.,Ltd；Android and Horn Google player are the trademarks of Google Inc., App Store is a service mark of Apple Inc.
图示 成型尺寸 140*140 mm 压线 展开尺寸 xx*xx mm 说明书类 反压线 图纸方向 印刷方向 EPE类 +5mm/-3mm 纸箱类 单瓦楞 ±3mm 双瓦楞 ±5mm 裁切线 标签类 齿刀线 x/x mm 开槽 公差（无特殊说明下） 粘合区域 California Proposition 65 ±0.5mm ±1mm PE袋类 0~200mm 20~500mm ＞500mm ±2mm ±3mm ±5mm 外尺寸:0~400mm ±2mm 模具成型类 400~600mm ±3mm ＞600mm ±4mm (EPS/纸塑等） 腔体尺寸:+2/-0mm NO PASSENGERS 1 person only! This vehicle is designed as an operator-only model.
