User manual

86
Maintenance procedure: 1x/month 1x/4months 1x/6months 1x/12months
Check tire pressure: Front = 22 psi; Rear = 25 psi
   
Check tire wear (tread depth): Front = 2 mm; Rear = 3.8 mm
   
Ensure rider mat is intact, secure, and free of debris
   
Inspect rider controls for proper installation
   
Inspect charge port for condition/functionality
   
Battery Connector: free of corrosion and/or debris (Service Manual)
   
Ensure all lights are functional (Service Manual)
   
Inspect bodywork/fenders for cracks/obstructions/debris
   
Check fastener torque: Rear wheel nuts = 55N-m(40ft-lbf)
   
Windshield: clean with a dry, lint-free cloth
   
Check for play in steering: Apply front brake, pull forward and back-
ward; if play is felt vehicle needs service.
3
  
Brake lever pivot: no binding or sticky action
 
Check brake discs for wear: 3.2 mm wear limit
2

Check brake pad wear: replace if less than 1 mm pad material
2

Recommended Maintenance Schedule–SE-3 Patroller
Key:  = required,
2
= Performed by Level 2 trained Segway Certified Technician only,
3
= Performed by Level 3 trained Segway Certified Technician only