User manual
64
Brakes
Adjusting the Brake Levers
The angle of the brake levers can be adjusted for the user's preference.
WARNING
Make sure the brake levers are easy to reach and are fastened to the appropriate
torque. Brakes are an essential safety feature of the SE-3 Patroller. If the user
cannot reach the brakes they may not be able to stop the vehicle, which could
lead to injury or death.
Tools: 5 mm hex wrench
Torque wrench
1. Make sure the SE-3 Patroller is is powered off and unplugged.
2. Apply the parking brake (p. 24).
3. Using a 5 mm hex wrench, loosen the two fasteners on the brake
lever clamp (Figure 52).
4. Rotate the brake lever to the desired position, being careful not to
pinch the cables on any chassis hardware.
5. Using a 5 mm hex wrench, tighten the two fasteners on the brake
lever clamp. Torque to 10N-m(7.3ft-lbf).
Figure 52: Brake Lever Fasteners
Brake lever fasteners