User manual

48
Installing the Battery Module
CAUTION
The Battery Module weighs approximately 40 lbs. Do not attempt to install or
remove the Battery Module if you are incapable of safely lifting an object of
this weight. Use standard lifting techniques.
Tool Required: None
1. Make sure the Segway SE-3 Patroller is unplugged, powered off, and
the parking brake is engaged.
2. Make sure the latches are configured as in Figure 35.
3. Holding the Battery Module by both front and top handles, slide it
into the opening.
4. Twist the latches and fold them back (Figure 36) to lock the Battery
Module.
To remove the Battery Module, see "Removing the Battery Module," (p. 49).
Figure 35: Slide the Battery Module into the SE-3 Patroller
Figure 36: Twist and close the Battery Module Latches
Close latches to lock Battery ModuleTwist latches outward