Specifications

41
service
Remove/Reinstall Mat
Tools Required: None for
pSeries or Segway XT
models. For i Series or
Segway GT models, if you
have any Gearbox-
mounted part installed,
you must first remove that
part, prior to removing
the Mat.
1. Make sure the Segway HT is powered off and not
plugged in. It is unsafe to perform this procedure
while the Segway HT is powered on or charging.
2. Lift Mat off Platform. For i Series and Segway GT
models, pull both “ears” of the Mat inward, out of
fender channels.
Reinstall Mat
Tool Required: None.
1. Make sure the Segway HT is powered off and not
plugged in. It is unsafe to perform this procedure
while the Segway HT is powered on or charging.
2. Before installing Mat, make sure top of Platform
and bottom of Mat are clean, dry, and free of debris.
3. Place new Mat on Platform and press down.
4. For i Series and Segway GT models, press ears
back into the fender channels, then reinstall any
Gearbox-mounted part, following the instructions
that came with that part.
Remove Grips
Tool required: 5 mm hex wrench.
1. Make sure the Segway HT is powered off and not
plugged in. It is unsafe to perform this procedure
while the Segway HT is powered on or charging.
2. Remove grip by removing the bolt using the 5 mm
hex wrench.
3. Pull grip off shaft.
Reinstall Grips
Tool required: 5 mm hex wrench.
1. Make sure the Segway HT is powered off and not
plugged in. It is unsafe to perform this procedure
while the Segway HT is powered on or charging.
2. Before installing grip, make sure inside of grip and
outside of shaft are clean, dry, and free of debris.
3. Slide grip onto shaft. Note that it is keyed and will
only go on one way.
4. Thread in fastener and tighten with 5 mm hex
wrench.
Tightening Torque: 6.8 N-m (5.0 ft-lbf)
Cleaning
Clean your Segway HT with soap and water and a soft
cloth. Do not use a power washer or high pressure hose
because this could drive water into components that
must stay dry. Avoid getting water in the Charge Port.
Do Not Open the Platform or
Gearboxes
Do not attempt to open the Platform. There are no user
serviceable parts inside. By opening the Platform, you
risk electric shock injury. Also, you could void your
limited warranty, damage your Segway HT, and render
it unsafe to use. Do not attempt to open the Gearboxes.
There are no user serviceable parts inside. You could
damage your Segway HT and render it unsafe to use.
Accessories
You may be interested in adding accessories to your
Segway HT. Please contact an Authorized Segway
Dealer or visit www.segway.com to learn what
accessories are available. For a list of Dealers, visit
www.segway.com.
WARNING!
Never clean the Mat or tires with any
specialized cleaners because these products
may reduce traction, resulting in injury.