Specifications

32
please read and follow
> Unplug before servicing.
Disconnect your Segway HT from AC power before
removing or installing Battery Packs or performing
any other service. See the Reference Manual for
additional warnings and instructions regarding
service.
> Pre-ride inspection.
Inspect your Segway HT before each use. Do not
use if any part is loose or damaged. If you discover
any loose or damaged part, consult the Reference
Manual.
> Clear the Platform.
Do not place any objects on the Platform. This could
cause the Segway HT to move on its own when in
Balance Mode.
> Do not separate the Tire from the Wheel.
You could damage your Segway HT and render it
unsafe to use.
> Avoid submersion.
Do not submerge the Battery Packs or Platform in
water. Do not wash the Segway HT with a power
washer or high pressure hose. Avoid getting water
in the Charge Port. Always close the Charge Port
Cover after charging.
Avoid exposure to heavy downpours or extended
periods of heavy rain (including during riding,
storage, or while being transported.) If your
Segway HT has been exposed to a heavy downpour
or an extended period of rain, refer to the Reference
Manual for instructions.
Clean with soap and water and a soft cloth.
> Dry Charge Port and Key Port.
Make sure that the Charge Port is dry before you
plug in the Power Cord. If the Key Port becomes
wet, the Port may not recognize the Key. Dry it
before attempting to power on.
> Do not open the Platform.
There are no user serviceable parts inside the
Platform. By opening the Platform, you risk electric
shock injury. Also, you could void your limited
warranty, damage your Segway HT, and render it
unsafe to use.
> Do not open the Gearboxes.
There are no user serviceable parts inside the
Gearboxes. You could damage your Segway HT and
render it unsafe to use.
> Do not use in hazardous atmospheres.
The Segway HT has not been certified for use in
hazardous atmospheres as defined in NFPA 70,
National Electric Code. Hazardous atmospheres are
locations where fire or explosion hazards may exist
due to flammable gases, vapors, liquids, dust, or
fibers.
> Do not remove any component.
Follow the instructions in the Reference Manual for
servicing your Segway HT.