Specifications

Page 16 of 106 Basic Rider Optimization Training for the Segway HT
Instructor Guide and Participant Workbook Rev 3.5i - January 2004
© Segway LLC 2002 P/N 1707100001aa
Key
Control Shaft, Height Adjustment Collar and Control Shaft Base
Notes:
There are three types of Keys- each
has a different top speed when riding
forward:
> Beginner Key (6mph /10 km/h)
> Sidewalk Key (8 mph / 13 km/h)
> Open Environment Key (12.5 mph /
19 km/h) for the i and e Series
Models, and 10 mph / 13 km/h for
the p Series Model.
There is a 64-bit ID-encoded number on
each key for security. This is similar to a
password, and can be directly read
from the key. There are
18,000,000,000,000,000,000 (not a
t
y
po!
)
unique combinations.
Notes:
Adjust the height with the Height Adjustment
Collar. DO NOT over-tighten the Height
Adjustment Collar. Just make it snug.
The Height Adjustment Collar does not “fix” a
Handlebar/Control Shaft Assembly that twists. If
the Handlebar/Control Shaft Assembly is twisting
right and left, loosen the Control Shaft Clamp
bolt, lay the Handlebar against the floor to
straighten, make sure the Control Shaft is fully
inserted into the top of the Control Shaft Base to
protect from water damage, then tighten the bolt
holding the clamp with the Hex wrench provided.
The Control Shaft Base houses a charge port
capable of handling input voltage range between
100v and 240v, 50-60Hz and current draw on input
is 1.4 amps. Use an adapter for different countries’
plug configurations.