User Manual

Switch Speed Mode
In the power-on state, when the kickscooter is still, you can step on the rear fender twice to switch the speed mode.
Note: For your safety, the hub motor will not start if the speed is less than 1.2 mph (2 km/h).
3. Accelerate and decelerate: Within 7.5 mph (12 km/h), continuously kick to accelerate.
Step on the rear fender to brake.
4. Turn: To turn, shift your body and turn the handlebar slightly.
WARNING: Stay alert and avoid abrupt acceleration or deceleration. Otherwise you risk serious injury due to imbalance, loss of traction and falls. DO NOT
perform stunts of any kind. Both tires must remain on the ground at all times.
5. Get off: When the kickscooter has stopped cruising, step off one foot at a time. Be extra cautious when dismounting for the first time. Take both feet off the
footboard for 30 seconds and with kickscooter will automatically power off.
WARNING
Stay calm and DO NOT jump off the kickscooter.
DO NOT touch the hub motor to avoid scald.
How to Charge
CAUTION: The charger is not a toy. Children should not be allowed to touch the charging device, the supervising adult needs to handle charging. Before and
during charging, make sure the kickscooter is turned off.
Charging steps