Instructions / Assembly

Part B.
User's Guide to Parts and Accessories of The Regulator,
Charge Valve of the Cylinder and Steps to Connecting the
Gas Tank to the Fire Table /Column.
T
his Safety Information passage holds information that :
1 ) shows you the Regulator ( pre-connected to the Fire Table / Column )
2 ) the Charge Valve of the Gas Tank and its relevant Valves.
There are Fire Table / Column that holds the Gas Tank INTERNALLY
and EXTERNALLY.
The Ow
ner / User must know all the different parts : Charge Valves and Regulator.
This picture shows different parts of the Charge Valve of the Gas Tank and the Regulator (12/19 ) is pre-
connected to the Fire Table / Column. the different components and parts of the Gas Tank and the Fire
Table / Column Regulator, as show in the diagram below.
Pic. A : Shows the Charge Valve of the Cylinder with
the different Valves and Coupling Nut, these forms
the top of the Gas Cylinder.
Pic. B : Shows the Regular pre-connected to a hose.
This Regulator is pre-connected to the Fire Table /
Column.
There are 2 kinds of Fire Table / Column.
Type 1 : Fire Table / Column that has an internal housing for Gas Tank Cylinders, where the Gas Tank is
held inside the Table / Column. The Gas Tank is held and bound in place inside the Fire Table / Column
with the Metal Ring and locked down with a Wing Screw / Nut.
Type 2 : Fire Table / Column that has the Gas Tank externally visible, whereby the hose shall be NO
SHORTER than 5 feet.
In some cases, you may have purchased a separate Gas Tank Holder to hold the Gas Tank. In this case,
the 5 feet distance between the Fire Table / Column to the Gas Tank applies too.
8