Instructions / Assembly

Part B.

User's Guide to Parts and Accessories of The Regulator,

Charge Valve of the Cylinder and Steps to Connecting the

Gas Tank to the Fire Table /Column.

his Safety Information passage holds information that :

1 ) shows you the Regulator ( pre-connected to the Fire Table / Column )

2 ) the Charge Valve of the Gas Tank and its relevant Valves.

There are Fire Table / Column that holds the Gas Tank INTERNALLY

and EXTERNALLY.

The Ow

ner / User must know all the different parts : Charge Valves and Regulator.

This picture shows different parts of the Charge Valve of the Gas Tank and the Regulator (12/19 ) is pre-

connected to the Fire Table / Column. the different components and parts of the Gas Tank and the Fire

Table / Column Regulator, as show in the diagram below.

Pic. A : Shows the Charge Valve of the Cylinder with

the different Valves and Coupling Nut, these forms

the top of the Gas Cylinder.

Pic. B : Shows the Regular pre-connected to a hose.

This Regulator is pre-connected to the Fire Table /

Column.

There are 2 kinds of Fire Table / Column.

Type 1 : Fire Table / Column that has an internal housing for Gas Tank Cylinders, where the Gas Tank is

held inside the Table / Column. The Gas Tank is held and bound in place inside the Fire Table / Column

with the Metal Ring and locked down with a Wing Screw / Nut.

Type 2 : Fire Table / Column that has the Gas Tank externally visible, whereby the hose shall be NO

SHORTER than 5 feet.

In some cases, you may have purchased a separate Gas Tank Holder to hold the Gas Tank. In this case,

the 5 feet distance between the Fire Table / Column to the Gas Tank applies too.